Mixergy PV Switch / Third-Party Diverters

Find support for issues relating to the PV Switch Kit and third-party diverters.

Third-Party Diverter Not Heating Cylinder

Causes

  • Incorrect setup or configuration
  • Immersion heater thermostat too low
  • Tank fully charged (100%)

Solution

  • Follow diverter manufacturer instructions
  • Set immersion heater thermostat to max
  • If tank is 100% charged, drain 20–30% before recommissioning

RCD Tripping When Cylinder is Powered On

Possible Cause

  • Faulty wiring to PV switch, diverter, or immersion heater

Solution

  • Inspect all mains wiring for faults or incorrect configuration