Issues and solutions related to the Mixergy Solar X's Embedded Solar Diverter.
Installing the Current Reader for Solar X Integration
Issue: Solar diverter not registering current / cylinder switching immersion to full power
Solution: Proper clamp installation and software setup
Steps
- Clamp must go around the incoming neutral cable—arrow toward fuse.
- Mount the reader within 200mm of mains cable.
- Connect reader directly to diverter via RJ-45.
- In the Mixergy App, enable "Use spare PV to heat tank".
Important: Confirm clamp orientation and secure connections before testing.
Rapidly Flashing Red Light on Cylinder Controller
Issue: Cylinder unable to detect the current reader.
Solution: Check wiring between the cylinder controller, diverter, and current clamp.